Pottery Tools Blank Painting Set Transfer Paper Light-resistant Not Easy Deform Ceramic Blank Painting Transfer Copy Pattern

Good luck with your favorite purchasesPottery Tools Blank Painting Set Transfer Paper Light-resistant Not Easy Deform Ceramic Blank Painting Transfer Copy Pattern   【Product Introduction】 1. Pattern transfer, one set, versatile, delicate presentation 2. Uniform density, fine and transparent details are clearer, easy to see through the manuscript, the lines are clear and there is no ghosting 3. It has the characteristics of purity, good transparency, light resistance, high temperature resistance, high strength, not easy to deform, aging resistance, etc. 4. Precise trimming process to avoid warping of burrs and smooth edges 5. Strong and durable, not easy to break, and the calligraphy and painting are not stained or leaked. 6. It can be easily mastered by novices, especially those who have no painting foundation. It is a good choice! 7. Contains 1 pencil + 1 instruction sheet + 10 sheets of transfer paper, all at once, making it worry-free and easy to start creating. 8. The paper has good flexibility, high folding resistance and good wrinkle resistance. Note: After the transfer paper is used up, it cannot be used again. Storage: In a dry and cool place, make sure the transfer paper does not get wet Recommendation: Try to use up the transfer paper within 3 months 【Usage steps】 1. Select the pattern that needs to be printed, and perform a horizontal mirror flip process, then print out the mirrored pattern, or display it directly on an electronic device such as an IPAD; 2. Cut the transfer paper to a suitable size according to the size of the paper, and cover it on the pattern that needs to be printed; 3. Transfer paper is divided into smooth side and rough side. When using, the rough side needs to be placed toward the pattern; 4. Use a red pencil to trace along the outline of the pattern. Because the copy paper is thin, the tracing force should be light to avoid scratching the paper; 5. Dip a sponge into clean water and gently wipe the surface of the blank to rehydrate it and remove dust; 6. Spread the transfer paper with the traced pattern flatly on the surface of the blank, making sure there are no wrinkles, otherwise it will affect the transfer effect; 7. Use a brush dipped in a small amount of water and lightly paint the paper surface; the tip of the pen can be kept slightly moist. Too much water will cause the pattern to smudge; 8. After the transfer paper is completely dry, gently peel it off; 9. Finally, use a brush, underglaze marker or ceramic colored lead to outline and fill in color along the red outline; 10. After the painted work is dry, it can be sprayed with glaze and fired. 【Notes】 1. Please be sure to mirror the pattern before rubbing, otherwise the image transferred to the blank will be reversed; 2. Place the rough side of the transfer paper face down, we need to trace on the smooth side; 3. When brushing water with a brush, make sure that the side with the traced image faces the surface of the blank; 4. The brush should not be dipped in too much water. Too much water will cause the red writing to blur and affect the clarity of the lines. 5. The transfer paper must be kept flat when laying it down. If there are wrinkles, this part will not be completely transferred to the base; 6. The red mark stamped on the blank will completely disappear during the high-temperature firing process, so there is no need to worry about leaving any red marks.